Microfilter (UV-610T120) UV Ballast for UV-610 AC 120V-60Hz 6 Watts 125MA
UV-610T120 Ballast Technical Details
| Model Number | UV-610T120 |
| Manufacturer | Microfilter |
| Compatible System | UV-610 UV Disinfection System |
| Input Voltage | AC 120V, 60Hz |
| Power Output | 6 Watts |
| Current Rating | 125mA |
| Alternate Part Number | OPP625 |
| Application | UV Lamp Power Supply |
Ballast Replacement Steps
- Disconnect power to the UV system at the breaker or unplug the unit completely before beginning any electrical work.
- Remove the ballast cover or housing panel on your UV-610 unit to access the existing ballast and wire connections.
- Disconnect wires from the old ballast (note wire positions or take a photo for reference), remove mounting hardware, and install the UV-610T120 in the same orientation.
- Reconnect wires according to the wiring diagram on the ballast label or your reference photo, ensuring all connections are secure and properly insulated.
- Replace the cover, restore power, and verify the UV lamp illuminates properly within 30 seconds of startup.
System Compatibility
The UV-610T120 ballast is engineered specifically for the Microfilter UV-610 ultraviolet water disinfection system. This ballast is also cross-referenced as OPP625 and provides the precise electrical characteristics required to power the UV-610 lamp at optimal germicidal wavelength. Not interchangeable with other UV system ballasts without verifying voltage, wattage, and connector compatibility. Standard North American 120V 60Hz electrical supply required.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Microfilter (UV-610T120) UV Ballast for UV-610 AC 120V-60Hz 6 Watts 125MA
Microfilter (UV-610T120) UV Ballast for UV-610 AC 120V-60Hz 6 Watts 125MA
UV-610T120 Ballast Technical Details
| Model Number | UV-610T120 |
| Manufacturer | Microfilter |
| Compatible System | UV-610 UV Disinfection System |
| Input Voltage | AC 120V, 60Hz |
| Power Output | 6 Watts |
| Current Rating | 125mA |
| Alternate Part Number | OPP625 |
| Application | UV Lamp Power Supply |
Ballast Replacement Steps
- Disconnect power to the UV system at the breaker or unplug the unit completely before beginning any electrical work.
- Remove the ballast cover or housing panel on your UV-610 unit to access the existing ballast and wire connections.
- Disconnect wires from the old ballast (note wire positions or take a photo for reference), remove mounting hardware, and install the UV-610T120 in the same orientation.
- Reconnect wires according to the wiring diagram on the ballast label or your reference photo, ensuring all connections are secure and properly insulated.
- Replace the cover, restore power, and verify the UV lamp illuminates properly within 30 seconds of startup.
System Compatibility
The UV-610T120 ballast is engineered specifically for the Microfilter UV-610 ultraviolet water disinfection system. This ballast is also cross-referenced as OPP625 and provides the precise electrical characteristics required to power the UV-610 lamp at optimal germicidal wavelength. Not interchangeable with other UV system ballasts without verifying voltage, wattage, and connector compatibility. Standard North American 120V 60Hz electrical supply required.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
UV-610T120 Ballast Technical Details
| Model Number | UV-610T120 |
| Manufacturer | Microfilter |
| Compatible System | UV-610 UV Disinfection System |
| Input Voltage | AC 120V, 60Hz |
| Power Output | 6 Watts |
| Current Rating | 125mA |
| Alternate Part Number | OPP625 |
| Application | UV Lamp Power Supply |
Ballast Replacement Steps
- Disconnect power to the UV system at the breaker or unplug the unit completely before beginning any electrical work.
- Remove the ballast cover or housing panel on your UV-610 unit to access the existing ballast and wire connections.
- Disconnect wires from the old ballast (note wire positions or take a photo for reference), remove mounting hardware, and install the UV-610T120 in the same orientation.
- Reconnect wires according to the wiring diagram on the ballast label or your reference photo, ensuring all connections are secure and properly insulated.
- Replace the cover, restore power, and verify the UV lamp illuminates properly within 30 seconds of startup.
System Compatibility
The UV-610T120 ballast is engineered specifically for the Microfilter UV-610 ultraviolet water disinfection system. This ballast is also cross-referenced as OPP625 and provides the precise electrical characteristics required to power the UV-610 lamp at optimal germicidal wavelength. Not interchangeable with other UV system ballasts without verifying voltage, wattage, and connector compatibility. Standard North American 120V 60Hz electrical supply required.
